The Liebherr UG 1211 Comfort is an under-counter freezer offering efficient freezing performance with a 121-liter capacity, featuring BioFresh technology for optimal food preservation, adjustable temperature control, SuperFrost function for rapid freezing, an interior light, reversible door, and an audible door alarm. Designed for built-in or freestanding use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Freezer compartment with adjustable shelves, Temperature control panel, Door with reversible hinges, Interior light, Door alarm, Air vents.
| Feature | Description |
|---|---|
| BioFresh technology | Maintains optimal humidity and temperature for longer food freshness |
| SuperFrost function | Rapidly lowers temperature for freezing new items |
| Adjustable thermostat | Digital control for precise temperature setting |
| Reversible door | Door can be hinged on left or right side |
| Interior light | LED illumination for visibility |
| Door alarm | Audible alert if door is left open |
| Adjustable feet | For leveling the appliance |
| Freezer drawers | Organized storage with transparent fronts |
| Power cord | For electrical connection |
| Air circulation system | Ensures even cooling throughout compartment |
Unpack and inspect contents. Ensure location meets requirements.
WARNING! Do not install near ovens or radiators. Ensure proper ventilation to prevent overheating.
After installation, allow the freezer to stabilize before use.
CAUTION! Do not load warm food directly into freezer; allow to cool to room temperature first.
Control panel located inside or on front of unit.
Controls: Power On/Off, Temperature adjustment buttons (+/-), SuperFrost button, Alarm reset/mute.
Temperature Setting: Range from -24°C to -16°C. Recommended setting is -18°C. SuperFrost: Activates maximum cooling for 24 hours or until manually turned off. Alarm: Sounds if temperature rises above safe level or door is ajar; press button to acknowledge/reset. Display: Shows set temperature, actual temperature (if equipped), and active functions.
Ensure proper electrical connection for safe operation.
Tip: If power cord is damaged, it must be replaced by a qualified technician.
Optimal use ensures efficiency and food safety.
WARNING! Do not store explosive substances or glass containers with liquids that may freeze and burst.
SuperFrost: Press button to activate; indicator light will stay on. Deactivates automatically after 24 hours or press again to cancel. Door Alarm: Sounds after door is open for approximately 2 minutes. Press any button to silence. BioFresh: Maintains specific compartment at near 0°C and high humidity for produce, meat, fish (if applicable to model).
Unplug before cleaning. Remove all food and shelves/drawers.
CAUTION! Never use abrasive cleaners, scouring pads, or chemical solvents. Do not pour water inside or over the appliance.
CE Marked: Complies with European Low Voltage and EMC Directives. WEEE Symbol: Indicates separate collection for electronic waste. The appliance contains flammable refrigerant (R600a) and insulating foam; disposal must be performed by authorized personnel. For support, visit www.liebherr.com or contact your local Liebherr service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Freezer not cooling | Power supply/thermostat | Check if plugged in and outlet works; ensure thermostat is not set to OFF. |
| Excessive frost/ice | Door seal/warm food | Check door seal for damage; ensure door closes fully; avoid putting warm food inside. |
| Unusual noise | Leveling/objects touching | Ensure unit is level; check if interior items are touching walls; ensure nothing is touching rear. |
| Alarm sounds | Door open/temp rise | Close door firmly; check if large amount of warm food added recently; allow temperature to stabilize. |
| Interior light not working | Bulb/switch | Replace LED bulb (if user-replaceable); check door switch operation. |
| Water pooling inside or under | Drain blocked/defrosting | Check drain hole at back of interior for blockage; clear if necessary. |
Reset: Unplug for 5 minutes, then reconnect to reset electronic control.
Service: Contact authorized Liebherr service. Do not attempt repairs yourself, especially involving refrigerant circuit.