The Liebherr SUFsg 5001 is a premium upright freezer featuring NoFrost technology, high energy efficiency (A+++), SuperCool function, adjustable temperature zones, glass shelves, interior LED lighting, reversible door, child lock, and alarm system. It is designed for household use with a total capacity of 500 liters. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Upright freezer cabinet, electronic control panel, NoFrost evaporator, glass shelves, interior LED light, reversible door hinges, door bins, and lockable castors.
| Feature | Description |
|---|---|
| NoFrost Technology | Prevents ice buildup automatically; no manual defrosting required |
| SuperCool Function | Rapidly lowers temperature for new food loads |
| Energy Class | A+++ for maximum energy efficiency |
| Adjustable Shelves | Glass shelves that can be repositioned for flexible storage |
| Interior Lighting | LED light for clear visibility |
| Reversible Door | Door can be hung left or right to suit room layout |
| Child Lock | Prevents unintended changes to settings |
| Temperature Alarm | Audible alert if temperature rises above safe level |
| Lockable Castors | Easy mobility and stable positioning |
| Total Capacity | 500 liters net volume |
Unpack and inspect contents. Position on a level, stable floor.
WARNING! The appliance is heavy; use two people for lifting and moving. Ensure the floor can support the weight.
After installation, power on the freezer and configure initial settings.
CAUTION! Do not block air vents inside the cabinet. Overloading can reduce efficiency.
The electronic control panel is located on the front top of the appliance.
Buttons & Display: POWER ON/OFF, Temperature Adjustment (+/-), SuperCool Button, Alarm Reset, Child Lock Button.
Temperature Setting: Range from -24°C to -16°C. Default recommended setting is -18°C. SuperCool Mode: Activates maximum cooling for approximately 6 hours, then returns to set temperature. Alarm Indicator: Flashes and beeps if internal temperature rises critically (e.g., door left open). Child Lock: Locks the control panel to prevent accidental setting changes.
For optimal food preservation and energy efficiency.
Tip: Use a separate thermometer to occasionally verify the internal temperature.
The NoFrost system automatically prevents ice formation on the interior walls and shelves.
WARNING! Never use sharp objects to remove ice. If ice forms, it indicates a problem with the door seal or that the NoFrost system requires service.
Maximize efficiency to reduce electricity consumption.
Unplug the appliance before any cleaning.
CAUTION! Never use steam cleaners, scouring pads, or chemical solvents. Do not pour water inside the appliance.
This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2011/65/EU (RoHS). The refrigerant R600a is flammable but contained within a sealed system. Dispose of the appliance according to local WEEE (Waste Electrical and Electronic Equipment) regulations. For service or support, contact Liebherr Customer Service or visit www.liebherr.com.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Appliance not cooling | Power issue / Incorrect setting | Check if plugged in and power is on. Verify temperature setting is not too warm. |
| Alarm sounds | Door ajar / Power failure | Close door firmly. Check if there was a power outage; food may need inspection. |
| Excessive frost/ice inside | Faulty door seal / NoFrost system error | Clean and check door gasket. If problem persists, service is required. |
| Unusual noises | Appliance not level / Fan obstruction | Level the appliance. Ensure no food packages are touching the rear fan cover. |
| Control panel unresponsive | Child lock active / Power surge | Deactivate child lock. Unplug for 5 minutes, then reconnect. |
| High energy consumption | Poor location / Dirty condenser | Relocate away from heat sources. Clean the condenser coil. |
Reset: Unplug the appliance for 10 minutes to perform a soft reset.
Service: For technical issues not resolved above, contact authorized Liebherr service. Do not attempt to repair the sealed refrigerant system yourself.