Liebherr freezer SRsdd 5250 Prime Manual

The Liebherr SRsdd 5250 Prime is a premium freestanding freezer designed for optimal food preservation. It features advanced cooling technology, precise temperature control, generous storage capacity, energy-efficient operation, and user-friendly controls. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Premium compressor, digital temperature display, adjustable thermostat, multiple storage drawers, door alarm, interior light, and energy-saving mode.

Installation

Unpack and inspect contents. Place on level, stable floor.

1. Positioning: Allow at least 5 cm clearance on all sides for ventilation.
2. Leveling: Adjust feet to ensure unit is perfectly level.
3. Power Connection: Plug into grounded 220-240V AC outlet.
4. Initial Rest: Let unit stand upright for 4 hours before first use.

WARNING! Do not place near heat sources. Ensure proper ventilation to prevent overheating.

First-Time Setup

After installation, prepare the freezer for use.

1. Power On: Connect to power; interior light should illuminate.
2. Set Temperature: Use control panel to set desired freezing temperature.
3. Activate Quick Freeze: Engage for 24 hours before loading food.
4. Load Food: Place items evenly, avoiding overpacking.

CAUTION! Do not load warm food directly; allow to cool first.

Specifications

• Model: SRsdd 5250 Prime
• Type: Freestanding Freezer
• Energy Class: A+++
• Total Capacity: 250 liters
• Temperature Range: -15°C to -24°C
• Noise Level: 38 dB(A)
• Power Supply: 220-240V AC, 50Hz
• Annual Energy Consumption: 180 kWh
• Climate Class: SN-T (10°C to 43°C)
• Dimensions (HxWxD): 85 x 60 x 63 cm

Controls and Settings

Control Panel: Digital display, temperature adjustment buttons, function buttons.

Functions: Temperature Set, Quick Freeze, Alarm Reset, Energy Saver, Child Lock.

Temperature Adjustment: Press TEMP button, use +/- to set. Quick Freeze: Press for rapid cooling (auto-off after 24h). Alarm Reset: Press to silence door alarm. Energy Saver: Reduces power during stable periods. Child Lock: Hold for 3 seconds to enable/disable.

Temperature Management

Optimal freezing preserves food quality and safety.

1. Monitor: Check display regularly.
2. Adjust: Change settings based on load and ambient temperature.
3. Quick Freeze: Use for large quantities or warm items.
4. Defrost: Automatic defrost system; no manual defrosting required.

Tip: Maintain temperature at -18°C or lower for long-term storage.

Storage Organization

Use drawers and compartments efficiently.

1. Label: Date and label all packages.
2. Separate: Keep raw and cooked foods in different drawers.
3. Avoid Overloading: Allow air circulation between items.
4. FIFO: Use "First In, First Out" to maintain freshness.

WARNING! Do not block air vents inside the freezer.

Maintenance & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth.

1. Interior: Remove drawers; wipe with damp cloth.
2. Exterior: Clean door and handle regularly.
3. Condenser: Vacuum dust from rear grille every 6 months.
4. Door Seals: Check and clean to ensure tight closure.

CAUTION! Never use abrasive cleaners or sharp objects.

Energy Efficiency

Designed for low power consumption.

• Keep door closed as much as possible.
• Ensure seals are intact.
• Use Energy Saver mode during stable periods.
• Position away from heat sources.

Note: Energy consumption may increase in high ambient temperatures.

Regulatory Information

Complies with EU directives for safety and energy efficiency. CE marked. Manufactured by Liebherr-Hausgeräte GmbH. For support, visit www.liebherr.com or contact local service center. Disposal: Follow local regulations for recycling electronic waste.

Troubleshooting

Reset: Unplug for 10 minutes to reset electronic controls.

Service: Contact authorized Liebherr service center. Do not attempt repairs yourself.