Liebherr freezer ICNd 5603 Pure Manual

The Liebherr ICNd 5603 Pure is a premium upright freezer featuring BioFresh technology, NoFrost system, electronic temperature control with digital display, super freeze function, interior LED lighting, reversible door, adjustable shelves and drawers, child lock, alarm system for temperature deviations and open door, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading and Organizing 7. Special Functions 8. Care & Cleaning 9. Energy Saving Tips 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright freezer cabinet, electronic control panel, NoFrost cooling system, BioFresh compartment, adjustable interior elements, reversible door.

FeatureDescription
NoFrost systemAutomatic defrosting; no manual defrosting required
BioFresh technologyPreserves freshness and nutrients longer
Electronic control panelDigital display with temperature setting and function buttons
Super freeze functionRapid freezing for large quantities of fresh food
Interior LED lightingEnergy-efficient illumination
Reversible doorDoor can be hung to open from left or right
Adjustable shelves/drawersFlexible storage configuration
Child lockLocks control panel to prevent unintended changes
Alarm systemAudible alert for temperature increase or door left open
Energy efficiency classHigh energy efficiency rating

Installation

Unpack and inspect contents. Position in suitable location.

  1. Choose location: Place on level, solid floor away from heat sources and direct sunlight.
  2. Adjust feet: Use adjustable feet to ensure appliance is level.
  3. Ventilation: Maintain minimum clearance (5 cm at sides, 10 cm at back, 30 cm above).
  4. Electrical connection: Plug into grounded 230V~50Hz outlet. Do not use extension cords.
  5. Door reversal (if needed): Follow instructions in separate door reversal leaflet.

WARNING! Appliance is heavy; use two people for moving. Ensure proper ventilation to prevent overheating.

First-Time Setup

After installation, allow appliance to stand upright for at least 4 hours before connecting to power.

  1. Initial power on: Connect to power. The display will illuminate.
  2. Set temperature: Press temperature button to set desired freezer temperature (recommended -18°C).
  3. Activate Super freeze: Before loading large quantity of fresh food, activate Super freeze for 24 hours.
  4. Load food: Place food items in organized manner, allowing air circulation.
  5. Child lock: Activate via control panel if required.

CAUTION! Do not load appliance immediately after first connection. Allow temperature to stabilize.

Specifications

Controls and Settings

Electronic control panel located on front exterior (or interior).

Buttons/Functions: Power On/Off, Temperature adjustment (+/-), Super freeze button, Alarm mute/reset, Child lock button.

Display Icons: Temperature display (°C), Super freeze active icon, Alarm icon (temperature or door), Child lock icon.

Temperature Setting: Range typically from -24°C to -16°C. Recommended setting: -18°C.

Super Freeze: Activates maximum cooling for approx. 24 hours or until manually deactivated. Use before adding large amounts of unfrozen food.

Alarm System: Sounds if temperature rises significantly (e.g., door left open, power failure) or if door is open for extended period. Mute with alarm button.

Child Lock: Press and hold child lock button for 3 seconds to activate/deactivate. Locks all other buttons.

Loading and Organizing

Optimize storage space and freezing performance.

  1. Use drawers and shelves: Adjust heights to accommodate different item sizes.
  2. Label and date: Use labels and dates on packages for easy identification.
  3. Allow air circulation: Do not overpack; leave space between items.
  4. Pre-freeze fresh food: Spread items out initially to freeze faster, then stack.
  5. BioFresh compartment: Use for items that benefit from precise temperature and humidity (refer to food guide).

Tip: Keep an inventory list on the door to track contents and minimize door opening time.

Special Functions

Utilizing advanced features for optimal performance.

  1. Super freeze: Activate 24 hours before adding large quantity of fresh food. Deactivates automatically or manually.
  2. Holiday mode: If going away for extended period, you can set a slightly higher temperature (e.g., -15°C) to save energy while keeping food frozen.
  3. Door open alarm: Alarm sounds after approximately 2 minutes if door is not properly closed. Close door firmly to deactivate.
  4. Temperature alarm: Sounds if interior temperature rises above a safe threshold. Check door seal, power supply, and ambient temperature.
  5. Fast freezing: For small amounts, place items against rear wall (coldest area) for fastest freezing.

WARNING! Do not store explosive substances or cans/bottles containing carbonated drinks as they may burst.

Care & Cleaning

Unplug appliance before cleaning. Never use sharp tools, abrasive cleaners, or solvents.

  1. Exterior: Clean with soft damp cloth and mild detergent. Dry thoroughly.
  2. Interior: Remove all food. Clean shelves and drawers with warm water and baking soda or mild soap. Rinse and dry.
  3. Door seals: Wipe with clean water only to maintain elasticity.
  4. Condensation drain (if accessible): Check and clean if necessary to ensure proper drainage.
  5. Defrosting: Not required due to NoFrost system. Any minor ice buildup will melt automatically.

CAUTION! Never use steam cleaners, hot water, or electrical appliances inside the freezer. Do not clean cold glass shelves with warm water—allow them to reach room temperature first.

Energy Saving Tips

Regulatory Information

This appliance complies with relevant EU Directives and standards. It contains insulation blown with cyclopentane and refrigerant R600a (isobutane), a flammable natural gas. Ensure disposal according to local regulations by authorized personnel. Do not damage cooling circuit. For EU: This product is marked with the symbol of the crossed-out wheeled bin. At the end of its life, it must be disposed of separately from household waste. Contact your local authority for recycling information. Manufacturer: Liebherr-Hausgeräte GmbH, Memminger Straße 77-79, D-88416 Ochsenhausen. For support, visit www.liebherr.com or contact your local Liebherr service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Appliance does not coolNo power / Plug not connectedCheck power outlet; ensure plug is firmly inserted; check household fuse/circuit breaker.
Temperature too high / Alarm soundsDoor not closed properly / Large quantity of fresh food added / Ambient temperature very highClose door firmly; check seal; activate Super freeze before adding fresh food; ensure ventilation space.
Unusual noisesAppliance not level / Components touching walls / Normal operating sounds (compressor, fan)Level the appliance; ensure nothing is touching the back/sides; some noise during compressor cycles is normal.
Condensation on exteriorHigh humidity / Door opened frequentlyWipe dry; reduce frequency and duration of door opening. Ensure room is ventilated.
Ice forms on food or interiorDoor left open / Damaged door seal / Food not packaged properlyCheck seal; replace if damaged; ensure food is wrapped airtight; close door properly.
Display is off or flashingPower interruption / Child lock active / Error codeCheck power; deactivate child lock; if error code persists (e.g., E1, E2), consult service manual.

Reset: Disconnect from power for 5 minutes, then reconnect. This may reset the electronic control.

Service: Do not attempt repairs yourself. Contact authorized Liebherr service. Provide model and serial number (on rating plate inside appliance).

Liebherr freezer ICNd 5603 Pure Manual © - All Rights Reserved 2025