Liebherr freezer ICBSd 5122 Plus BioFresh Manual

The Liebherr ICBSd 5122 Plus is a premium combination refrigerator-freezer with BioFresh technology, featuring separate climate-controlled zones for optimal food preservation, NoFrost system in the freezer compartment, high energy efficiency class, digital temperature display, door alarm, child lock, and adjustable glass shelves. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using BioFresh Compartments 7. Freezer Operation 8. Energy Saving Tips 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Refrigerator compartment with BioFresh zones, Freezer compartment with NoFrost, Digital control panel, Adjustable door bins, Glass shelves, Crisper drawers.

FeatureDescription
BioFresh technologySeparate humidity-controlled compartments for fruits/vegetables and fish/meat
NoFrost systemAutomatic defrosting in freezer; no ice buildup
Digital temperature displayShows current temperature settings for both compartments
SuperCool functionRapid cooling for new groceries
SuperFrost functionFast freezing to preserve food quality
Door alarmAudible alert if door left open
Child lockPrevents unintended setting changes
Adjustable shelvesTempered glass shelves that can be repositioned
Energy efficiencyHigh energy class for reduced power consumption
Reversible doorsDoors can be hinged left or right

Installation

Unpack and inspect contents. Place on level floor.

  1. Positioning: Allow minimum clearance (5cm sides, 10cm back, 20cm top).
  2. Leveling: Adjust front feet using wrench for stability.
  3. Electrical connection: Plug into grounded 120V AC outlet (dedicated circuit recommended).
  4. Door reversal: Follow manual instructions if changing door hinge side.
  5. Initial rest: Let appliance stand upright for 4 hours before first power-on.

WARNING! Appliance is heavy; use two people for moving. Ensure proper ventilation clearance.

First-Time Setup

After installation rest period, power on the appliance.

  1. Initial cooling: Set refrigerator to +4°C and freezer to -18°C (default).
  2. BioFresh setup: Adjust humidity sliders based on food type (high for vegetables, low for fish).
  3. Child lock: Enable via control panel if needed.
  4. Door alarm: Test by leaving door open for 2 minutes.
  5. SuperCool: Activate when loading large quantities of room-temperature food.

CAUTION! Do not load food until temperature indicators show set points reached.

Specifications

Controls and Settings

Digital control panel located inside refrigerator compartment.

Buttons: TEMP (refrigerator), TEMP (freezer), SUPER, LOCK, ALARM.

Temperature settings: Refrigerator (+2°C to +8°C), Freezer (-16°C to -24°C). Super functions: SuperCool (refrigerator) and SuperFrost (freezer) activate for 12-24 hours then auto-off. Child lock: Press LOCK for 3 seconds. Door alarm: Can be disabled temporarily (2 hours). Display: Shows set temperatures, active functions, and warning symbols.

Using BioFresh Compartments

Two separate drawers with independent humidity control.

  1. DrySafe (low humidity): For fish, meat, dairy (slide to left position).
  2. HydroSafe (high humidity): For fruits, vegetables, herbs (slide to right position).
  3. Temperature: Maintains near 0°C for optimal preservation.
  4. Cleaning: Remove drawers monthly; wash with mild soapy water.
  5. Loading: Do not overfill; allow air circulation.

Tip: Store different food types in designated drawers for best results.

Freezer Operation

NoFrost system prevents ice buildup automatically.

  1. Freezing fresh food: Use SuperFrost function 2 hours before adding unfrozen items.
  2. Storage organization: Use baskets and drawers for categorization.
  3. Defrosting: Not required due to NoFrost system.
  4. Ice production: Use ice tray in dedicated compartment.
  5. Power failure: Food stays frozen up to 24 hours if door kept closed.

WARNING! Do not refreeze thawed food. Keep freezer at least 2/3 full for efficiency.

Energy Saving Tips

Position away from heat sources (oven, radiator, direct sunlight). Ensure door seals are clean and tight. Allow hot food to cool before storing. Organize contents for quick access. Maintain recommended temperatures. Check door closure regularly.

Care & Cleaning

Unplug before cleaning. Interior: Use warm water with mild detergent. Exterior: Use damp cloth; stainless steel models use appropriate cleaner. Door seals: Clean with water only. Condenser: Vacuum dust from rear grille annually.

CAUTION! Never use abrasive cleaners, solvents, or steam cleaners. Do not wash removable parts in dishwasher unless specified.

Regulatory Information

Complies with applicable safety standards (UL, CSA). Contains refrigerant R600a (flammable). Disposal: Follow local regulations; professional recycling required. Copyright © Liebherr; trademarks of Liebherr-International AG. For support, visit www.liebherr.com or contact 1-800-944-5374.

Troubleshooting

SymptomPossible CauseCorrective Action
Appliance not coolingPower supply/doorsCheck plug connection; ensure doors close properly; wait 24 hours after first start.
Unusual noiseLeveling/fanCheck if appliance is level; ensure no items touching rear fan.
Water in interiorDrain blockageClean drain hole at back of refrigerator compartment.
Door alarm soundsDoor ajarClose door properly; check for obstructions in seal.
Temperature too highSettings/loadingAdjust temperature settings; reduce door openings; ensure adequate ventilation.
Ice in freezer drawersSeal issueCheck door seal; ensure drawers fully closed; contact service if NoFrost fails.

Reset: Unplug for 5 minutes then reconnect.

Service: 1-800-944-5374; www.liebherr.com

Liebherr freezer ICBSd 5122 Plus BioFresh Manual © - All Rights Reserved 2025