The Liebherr GX 823-20 is a high-performance upright freezer featuring NoFrost technology, electronic temperature control with digital display, super freeze function, interior LED lighting, reversible doors, and energy efficiency class A+++. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.
Key components: Upright freezer cabinet, electronic control panel, adjustable shelves and drawers, NoFrost system, interior light, reversible door hinges.
| Feature | Description |
|---|---|
| NoFrost Technology | Automatic defrosting; no ice buildup on food or interior walls |
| Electronic Control Panel | Digital temperature display and adjustment |
| Super Freeze Function | Rapidly lowers temperature for new food loads |
| Interior LED Lighting | Energy-efficient illumination |
| Reversible Doors | Door can be hinged on left or right side |
| Adjustable Shelves | Flexible storage configuration |
| Door Alarm | Audible alert if door is left open |
| Energy Class A+++ | High energy efficiency rating |
| Lock Option | Optional lock for security (accessory) |
| Climate Class SN-T | Designed for ambient temperatures 10°C to 43°C |
Unpack and inspect contents. Position in suitable location.
WARNING! Wait at least 4 hours after transportation before connecting to power. Ensure proper ventilation to prevent overheating.
After installation, prepare freezer for first use.
CAUTION! Do not load large quantities of unfrozen food at once. Use Super Freeze function to maintain temperature.
Electronic control panel located on front exterior.
Control Panel: Power On/Off, Temperature Display, Temperature Adjustment Buttons (+/-), Super Freeze Button, Alarm Reset Button.
Temperature Setting: Range from -24°C to -16°C. Recommended setting is -18°C. Super Freeze: Activates maximum cooling for approximately 24 hours or until manually deactivated. Alarm: Visual and audible alarm triggers if temperature rises above -12°C or door is left open. Display: Shows set temperature and actual temperature (alternating).
Optimize storage for efficiency and food preservation.
Tip: Place recently added food at the bottom or back to ensure older items are used first.
Automatic defrosting system prevents ice buildup.
WARNING! Do not block interior air vents. This can reduce efficiency and cause temperature fluctuations.
Ensure optimal energy efficiency.
Unplug before cleaning. Never use sharp tools, abrasive cleaners, or hot water.
CAUTION! Do not use electrical appliances inside the freezer for cleaning. Never use steam cleaners.
CE Mark: Complies with European safety and EMC directives. WEEE Symbol: Do not dispose with household waste; recycle according to local regulations. Refrigerant R600a: Flammable. Service only by qualified personnel. For support, visit www.liebherr.com or contact your local Liebherr service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Freezer not cooling | Power supply, temperature setting | Check plug and power outlet. Ensure temperature is set correctly. Activate Super Freeze. |
| Alarm sounds | Door open, temperature rise | Close door securely. Check if large amount of warm food was added. Allow time to cool. |
| Excessive frost | Door seal, frequent opening | Check door seal for damage or dirt. Minimize door openings. |
| Unusual noise | Appliance not level, items touching fan | Level the appliance. Ensure no food packages block interior vents or fan. |
| Water inside or under unit | Blocked drain (if applicable), defrost water | Check for blocked drain tube at back. Ensure floor is level. |
| Display not lit | Power failure, control fault | Check power connection. If problem persists, contact service. |
Reset: Disconnect from power for 5 minutes, then reconnect.
Service: Contact authorized Liebherr service. Do not attempt repairs involving refrigerant circuit.