Liebherr freezer GT 3622 Comfort Manual

The Liebherr GT 3622 Comfort is a premium upright freezer featuring NoFrost technology to prevent ice build-up, a spacious interior with adjustable glass shelves and door storage, electronic temperature control with digital display, SuperCool function for rapid cooling, alarm system for temperature deviations and door open warnings, energy-efficient operation, and reversible doors. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Storage Organization 7. NoFrost Technology 8. Energy Saving Tips 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright freezer cabinet with NoFrost system, electronic control panel, adjustable interior components, alarm system, and reversible door hinges.

FeatureDescription
NoFrost TechnologyPrevents ice formation on interior walls and food
Electronic Control PanelDigital temperature display and settings
SuperCool FunctionRapidly lowers temperature for new loads
Temperature AlarmAudible alert for temperature deviations
Door Open AlarmWarning if door remains open too long
Adjustable Glass ShelvesFlexible storage configuration
Door Storage BasketsFor smaller items and packages
Reversible DoorsCan be hung left or right
Energy Efficiency ClassA++ or higher (depending on model year)
Child LockPrevents unintended setting changes

Installation

Unpack and remove all packaging materials. Position in suitable location.

  1. Choose location: Place on level, solid floor away from heat sources and direct sunlight.
  2. Ensure ventilation: Maintain minimum clearance (5cm sides, 10cm back, 30cm top).
  3. Adjust leveling feet: Use wrench to adjust until unit is perfectly level.
  4. Connect to power: Plug into grounded 220-240V AC outlet.
  5. Door reversal (if needed): Follow manual instructions to change door hinge side.

WARNING! Freezer is heavy; use two people for moving. Ensure proper ventilation to prevent overheating.

First-Time Setup

After installation, allow freezer to stabilize before use.

  1. Initial cooling: Turn on and set to recommended temperature (-18°C). Let run empty for 4-6 hours.
  2. Set temperature: Use control panel to select desired freezing temperature.
  3. Configure alarms: Test alarm system and adjust sensitivity if available.
  4. Organize interior: Install shelves and baskets according to your storage needs.
  5. Load food: Place items evenly distributed, allowing air circulation.

CAUTION! Do not load large quantities of warm food at once. Use SuperCool function when adding multiple items.

Specifications

Controls and Settings

Electronic control panel located on front exterior or interior wall.

Control Elements: Power button, Temperature adjustment buttons, SuperCool button, Alarm reset/mute, Child lock button.

Temperature Setting: Adjust between -24°C (maximum freezing) to -14°C (energy saving). SuperCool Function: Activates rapid cooling for 24 hours then returns to set temperature. Alarm System: Visual and audible alerts for temperature rise above -15°C or door left open. Child Lock: Press and hold specific button combination to lock controls.

Storage Organization

Optimal organization maximizes efficiency and accessibility.

  1. Top shelves: Ready-to-eat foods, ice cream, frozen desserts.
  2. Middle shelves: Meat, poultry, fish (in sealed packaging).
  3. Bottom shelves: Vegetables, fruits, prepared meals.
  4. Door baskets: Small packages, frozen herbs, ice packs.
  5. Label and date: All items should be labeled with contents and freezing date.
  6. Air circulation: Leave space between items for cold air flow.

Tip: Group similar items together and maintain an inventory list to reduce door opening time.

NoFrost Technology

Automatic system prevents ice build-up without manual defrosting.

  1. How it works: Circulates dry cold air while removing moisture.
  2. Benefits: No ice accumulation on walls or food, consistent temperature, no defrosting required.
  3. Maintenance: Ensure air vents are not blocked by food items.
  4. Indicator: Some models have indicator for defrost cycle operation.

WARNING! Never scrape ice with sharp objects. If ice forms despite NoFrost, check door seal and temperature setting.

Energy Saving Tips

Proper use reduces energy consumption.

  1. Optimal temperature: -18°C is sufficient for most frozen foods.
  2. Full but not overfilled: Maintain 70-80% capacity for best efficiency.
  3. Quick access: Organize to minimize door opening time.
  4. Check seals: Ensure door gaskets are clean and sealing properly.
  5. Location: Keep away from ovens, heaters, and direct sunlight.
  6. Ventilation: Maintain recommended clearances around unit.

Care & Cleaning

Unplug before cleaning. Never use abrasive cleaners or sharp tools.

  1. Interior: Wipe with solution of mild detergent and warm water, then dry thoroughly.
  2. Exterior: Clean with damp cloth and mild detergent.
  3. Door seals: Clean gently with soapy water, check for damage.
  4. Condenser coils: Vacuum dust from rear coils annually (with unit unplugged).
  5. Defrost drain: Check and clean if accessible (though NoFrost minimizes need).

CAUTION! Never use steam cleaners, solvents, or abrasive materials. Do not pour water into interior.

Regulatory Information

CE marked: Complies with European safety and EMC directives. RoHS compliant: Contains no prohibited hazardous substances. WEEE symbol: Do not dispose with household waste; recycle appropriately. For EU: This product is guaranteed under the conditions of statutory regulations. Manufacturer: Liebherr-Hausgeräte GmbH, Memminger Straße 77-79, D-88400 Biberach/Riß. For support, visit www.liebherr.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Freezer not coolingPower issue, door sealCheck power connection; ensure door closes properly; verify temperature setting.
Alarm soundsTemperature rise, door openCheck door closure; reduce frequent opening; reset alarm.
Ice formation despite NoFrostDoor seal, frequent openingClean and check door seal; minimize door openings; ensure proper temperature.
Unusual noiseLeveling, fan obstructionCheck if unit is level; ensure nothing touches rear panel; allow clearance.
High energy consumptionLocation, load, sealsMove away from heat sources; check door seals; avoid overfilling.
Display not workingPower, child lockCheck power supply; disable child lock; consult manual for reset procedure.

Reset: Unplug for 5 minutes, then reconnect to reset electronic system.

Service: Contact authorized Liebherr service center. Do not attempt repairs yourself.

Liebherr freezer GT 3622 Comfort Manual © - All Rights Reserved 2025