The Liebherr GP 2733 Comfort is a high-efficiency upright freezer featuring NoFrost technology, electronic temperature control with digital display, SuperCool function, alarm system, child lock, adjustable interior lighting, and multiple storage compartments. Designed for household use with energy class A++ or better. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.
Key components: NoFrost system, electronic control panel, LED interior light, adjustable glass shelves, door compartments, freezer drawers, alarm indicator, child lock button.
| Feature | Description |
|---|---|
| NoFrost technology | Prevents ice buildup automatically; no manual defrosting required |
| Electronic control panel | Digital display for temperature setting and mode selection |
| SuperCool function | Rapidly cools new items; runs for approx. 6 hours then auto-switches off |
| Acoustic/visual alarm | Alerts if door left open or temperature rises above safe level |
| Child lock | Locks control panel to prevent unintended setting changes |
| Adjustable shelves | Glass shelves can be repositioned for flexible storage |
| Freezer drawers | Multiple compartments for organized storage |
| Door compartments | Storage for smaller items like ice packs or frozen goods |
| Energy efficiency | Energy class A++ or better for reduced power consumption |
| Reversible doors | Door can be hinged on left or right side as needed |
Unpack and inspect contents. Ensure all packaging materials are removed.
WARNING! Appliance is heavy; use two people for moving. Ensure proper ventilation to prevent overheating.
After installation wait period, power on the freezer.
CAUTION! Do not overload during initial cooling. Allow temperature to stabilize before filling.
Control panel located inside on upper right wall or on front display (depending on model variant).
Buttons/Functions: Power On/Off, Temperature adjustment (+/-), SuperCool button, Alarm reset, Child lock button.
Temperature setting: Range from -24°C to -16°C. Recommended setting: -18°C. SuperCool: Activates rapid cooling for 6 hours. Alarm: Visual LED and audible beep if door open >60 sec or temperature >-12°C. Child lock: Press and hold for 3 seconds to activate/deactivate. Display: Shows set temperature, alarm icons, active functions.
Optimize storage to maintain temperature and energy efficiency.
Tip: Organize by category (meat, vegetables, ready meals) for easy access.
Maximize efficiency to reduce electricity consumption.
Note: NoFrost technology eliminates manual defrosting, saving energy and maintenance time.
Unplug before cleaning. Never use sharp tools, abrasive cleaners, or hot water.
CAUTION! Do not use steam cleaners, solvents, or abrasive pads. Never pour water into the appliance.
Read all safety instructions before use.
WARNING! Risk of fire due to flammable refrigerant (R600a). Service only by authorized personnel.
CE marked. Complies with EU Directives: 2014/35/EU (Low Voltage), 2014/30/EU (EMC), 2011/65/EU (RoHS), and Regulation (EU) No 517/2014 (F-gases). Manufacturer: Liebherr-Hausgeräte GmbH, Memminger Straße 77-79, D-88400 Biberach an der Riß, Germany. For support, visit www.liebherr.com or contact local Liebherr service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Freezer not cooling | Power issue / door open | Check plug and power supply; ensure door closed properly; listen for compressor. |
| Alarm sounds | Door ajar / temp too high | Close door firmly; check if food blocking closure; allow temperature to drop. |
| Unusual noise | Appliance not level / items touching fan | Level the appliance; ensure no packages obstructing interior fan. |
| Water inside or under freezer | Drain hole blocked / defrost water overflow | Check and clear drain hole at back of interior (if present). |
| Control panel not responding | Child lock active / display off | Deactivate child lock; check if display is in energy-saving mode (touch any button). |
| Excessive frost buildup | Door seal damaged / frequent opening | Inspect and clean door seal; minimize door openings; contact service if seal faulty. |
| High energy consumption | Poor ventilation / incorrect temp setting | Ensure clearance around appliance; set temperature to -18°C; check door seal. |
Reset: Disconnect from power for 5 minutes, then reconnect to reset electronic control.
Service: Contact authorized Liebherr service. Do not attempt repairs yourself, especially involving refrigerant circuit.