Liebherr freezer FNd 4655-20 Manual

The Liebherr FNd 4655-20 is a high-performance upright freezer with NoFrost technology, offering a total net capacity of 204 liters. It features electronic temperature control with a digital display, SuperCool function, acoustic and optical door alarm, child lock, and energy efficiency class F. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Upright freezer cabinet, electronic control panel, adjustable shelves, door compartments, NoFrost evaporator, and ventilation system.

Installation

Unpack and inspect contents. Place on level, stable floor.

1. Positioning: Allow minimum clearance (2 inches at back, 1 inch at sides) for ventilation.
2. Leveling: Adjust front feet to ensure unit is perfectly level.
3. Electrical connection: Plug into grounded 120V AC, 60Hz outlet. Do not use extension cords.
4. Door reversal (optional): Follow instructions in separate door reversal leaflet if needed.
5. Initial rest: Let unit stand upright for at least 4 hours before first power-on.

WARNING! Unit is heavy; use two people for moving. Ensure proper ventilation to prevent overheating.

First-Time Setup

After installation rest period, power on the freezer.

1. Initial cooling: Press POWER button. Unit will start cooling to default setting of 0°F (-18°C).
2. Set temperature: Use + and - buttons to adjust to desired temperature. Recommended: 0°F (-18°C).
3. Activate SuperCool: Press SUPERCOOL button before loading large amounts of unfrozen food.
4. Set alarm: Door alarm is enabled by default. Test by leaving door open for >2 minutes.
5. Enable child lock: Press and hold LOCK button for 3 seconds to lock control panel.

CAUTION! Do not overload freezer during initial cooling. Allow 24 hours to reach stable temperature.

Specifications

• Model: FNd 4655-20
• Type: Upright freezer with NoFrost
• Total net capacity: 204 liters (7.2 cu. ft.)
• Energy efficiency class: F
• Annual energy consumption: 257 kWh/year
• Noise level: 38 dB(A)
• Refrigerant: R600a (isobutane)
• Insulation: Cyclopentane
• Climate class: SN-T (50°F to 109°F / 10°C to 43°C)
• Power supply: 120V AC, 60Hz, 1.5A
• Dimensions (HxWxD): 67.7" x 23.6" x 29.5" (1720 x 600 x 750 mm)
• Weight: 121 lbs (55 kg)

Controls and Settings

Control panel located on front upper section.

Buttons: POWER (On/Off), TEMPERATURE +/-, SUPERCOOL, ALARM ON/OFF, LOCK.

Display icons: Temperature reading, SuperCool active, Alarm active, Door open warning, Child lock active.

Temperature range: -14°F to 8°F (-26°C to -14°C). SuperCool: Activates for 24 hours then returns to set temperature. Alarm: Sounds if door open >2 minutes or temperature >14°F (-10°C). Child lock: Disables all buttons except POWER when active.

Storage Organization

Optimal organization ensures efficient freezing and easy access.

1. Shelves: Adjust height to accommodate different item sizes. Heavier items on lower shelves.
2. Door compartments: Store smaller packages, frozen vegetables, ice packs.
3. Freezing fresh food: Place new items against rear wall for fastest freezing.
4. Package labeling: Label all packages with contents and date.
5. Air circulation: Do not block air vents inside freezer compartment.

Tip: Maintain inventory list to minimize door opening time.

NoFrost Technology

Automatic defrosting system prevents ice accumulation.

1. How it works: Fan circulates cold air while hidden heating elements periodically melt frost on evaporator.
2. Benefits: No manual defrosting needed; consistent temperature; better energy efficiency.
3. Maintenance: Ensure air vents are not blocked. Clean condenser coil annually.
4. Water drainage: Melted frost evaporates automatically; no drip tray to empty.

NOTE: Slight humming during defrost cycle is normal.

Energy Saving Tips

Maximize efficiency and reduce operating costs.

• Keep temperature at 0°F (-18°C); each degree lower increases energy use by ~5%.
• Ensure door seals are clean and tight.
• Allow hot food to cool before freezing.
• Open door as briefly as possible.
• Position away from heat sources (oven, radiator, direct sunlight).
• Clean condenser coil at least once a year.
• Ensure adequate ventilation around unit.

Care & Cleaning

Unplug before cleaning. Never use sharp tools, abrasive cleaners, or hot water.

1. Interior: Clean with solution of warm water and baking soda (2 tbsp per quart). Rinse with clean water.
2. Exterior: Wipe with soft damp cloth. Use mild detergent if needed.
3. Door seals: Clean with water only; check for damage.
4. Condenser coil: Vacuum gently at rear of unit (unplug first).
5. Defrosting: Not required with NoFrost system.

CAUTION! Never use electrical appliances inside freezer for cleaning. Do not scrape ice (none should form).

Regulatory Information

This appliance complies with EU Directive 2012/19/EU on waste electrical equipment (WEEE). Contains refrigerant R600a and insulation cyclopentane, both flammable. Dispose according to local regulations. For EU: Do not dispose with household waste. Copyright © Liebherr-International AG. For support, visit www.liebherr.com or contact local Liebherr service center.

Troubleshooting

Reset: Unplug for 5 minutes, then reconnect to reset electronic control.

Service: Contact authorized Liebherr service center. Do not attempt repairs yourself.