Liebherr freezer FNc 7026 Manual

The Liebherr FNc 7026 is a premium freestanding freezer designed for high-performance freezing and long-term food storage. It features NoFrost technology to prevent ice buildup, SuperCool function for rapid cooling, adjustable temperature controls, an alarm system, energy-efficient operation, and multiple storage compartments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Freezer Functions 8. Alarm & Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Freezer cabinet with NoFrost system, electronic control panel, adjustable glass shelves, door compartments, alarm indicator, and castors for mobility.

Feature	Description
NoFrost technology	Prevents ice buildup; no manual defrosting required
SuperCool function	Rapidly lowers temperature for new loads
Electronic temperature control	Precise digital adjustment from -15°C to -24°C
Alarm system	Audible/visual warning for temperature rise or door open
Energy efficiency class	A++ rating for low power consumption
Adjustable shelves	Glass shelves for flexible storage organization
Door compartments	Baskets for smaller items and packages
Castors	Four wheels for easy relocation
Power indicator	LED shows operating status
Child lock	Prevents unintended setting changes

Installation

Unpack and inspect contents. Position in suitable location.

Remove packaging: Take off all tapes, foams, and transit bolts.
Place on level floor: Ensure stability; adjust feet if necessary.
Ventilation: Leave minimum 5 cm clearance at back and sides.
Connect to power: Plug into grounded 220-240V AC outlet.

WARNING! Do not tilt beyond 45° to avoid compressor damage. Use two people for moving.

First-Time Setup

After installation, allow freezer to stabilize before loading.

Initial cooling: Plug in and set to maximum cold for 3-4 hours.
Set temperature: Adjust to desired setting (recommended -18°C).
Load food: Distribute items evenly; avoid blocking air vents.
Activate SuperCool: Use before adding large quantities of unfrozen food.

CAUTION! Do not place near heat sources or in direct sunlight.

Specifications

Model: FNc 7026 freestanding freezer.
Energy Class: A++.
Total Capacity: 202 liters.
NoFrost: Yes, automatic defrosting.
Temperature Range: -15°C to -24°C.
Climate Class: SN-T (10°C to 43°C).
Power Supply: 220-240V AC, 50Hz.
Annual Energy Consumption: 186 kWh.
Dimensions (HxWxD): 85 x 60 x 63 cm.
Net Weight: 48 kg.

Controls and Settings

Electronic control panel located on front top section.

Buttons: Temperature adjustment (+/-), SuperCool, Alarm reset, Child lock.

Temperature Setting: Use +/- buttons to set between -15°C and -24°C. SuperCool: Activates rapid cooling for 24 hours then returns to set temperature. Alarm: Indicator lights/sounds when temperature rises above -12°C or door left open. Child Lock: Press and hold SuperCool for 3 seconds to lock/unlock controls.

Connecting to Power

Use dedicated grounded outlet; avoid extension cords.

Ensure voltage matches rating (220-240V AC).
Plug directly into wall outlet.
Check power indicator LED is illuminated.

Tip: Use surge protector for added safety in areas with unstable power.

Using Freezer Functions

Optimize performance with proper operation.

Daily use: Open door minimally; close firmly after use.
Temperature adjustment: Change settings as needed for load.
SuperCool: Activate 2-3 hours before adding unfrozen food.
Storage organization: Use shelves for flat items, baskets for packages.
Freezing fresh food: Place in fast-freeze compartment if available.
Energy saving: Keep full but not overloaded; maintain -18°C.
Vacation mode: Not applicable; maintain normal operation.

WARNING! Do not store explosive or flammable substances. Keep ventilation openings clear.

Alarm & Safety Features

Temperature Alarm: Activates if interior temperature rises above -12°C. Door Alarm: Sounds if door left open >2 minutes. Reset: Press alarm button to acknowledge; resolves when temperature normalizes or door closed.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth; never use abrasive cleaners.

Exterior: Wipe with damp cloth; dry thoroughly.
Interior: Remove shelves/baskets; wash with warm soapy water.
Condenser: Vacuum rear grille annually to maintain efficiency.
Door seals: Clean with water only; check for proper seal.

CAUTION! Do not use steam cleaners, solvents, or sharp objects.

Regulatory Information

CE certified; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Liebherr-Hausgeräte GmbH. For support, visit www.liebherr.com or contact local service center. Disposal: Follow WEEE regulations; do not dispose with household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Freezer not cooling	Power/thermostat	Check power connection; ensure thermostat set correctly.
Alarm sounds	Door open/temp rise	Close door firmly; check if overloaded or power outage occurred.
Excessive frost	Door seal/damage	Clean door seal; ensure proper closure; replace if damaged.
Unusual noise	Leveling/items	Ensure freezer is level; check if items vibrating against walls.
High energy use	Location/load	Move away from heat sources; avoid frequent door opening.

Reset: Unplug for 5 minutes, then reconnect to reset electronics.

Service: Contact authorized Liebherr service center; have model and serial numbers ready.