Liebherr freezer FNc 5076 Manual

The Liebherr FNc 5076 is a premium freestanding freezer offering advanced cooling technology, high energy efficiency (A+++), and flexible storage solutions. It features NoFrost technology to prevent ice buildup, SuperCool function for rapid cooling, temperature alarm, child lock, and adjustable glass shelves. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Freezer Functions 8. Storage & Organization 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Freezer compartment with NoFrost technology, electronic control panel, adjustable glass shelves, door compartments, temperature alarm, and child lock.

FeatureDescription
NoFrost technologyPrevents ice buildup; no manual defrosting required
SuperCool functionRapidly cools new items to preserve freshness
Temperature alarmAudible alert if temperature rises above safe level
Child lockLocks control panel to prevent unintended changes
Adjustable glass shelvesFlexible storage for items of various sizes
Door compartmentsStorage for smaller items like frozen vegetables
Energy efficiencyA+++ rating for low power consumption
Reversible doorsDoor can be hinged left or right for installation flexibility
Fast freezingQuick-freeze function for large quantities
Interior lightLED illumination for clear visibility

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Positioning: Allow at least 5 cm clearance at back and sides for ventilation.
  2. Leveling: Adjust front feet to ensure unit is level; use a spirit level.
  3. Door reversal (optional): Follow instructions in manual to change hinge side.
  4. Power connection: Plug into grounded 220-240V AC outlet.

WARNING! Freezer is heavy; use two people for moving. Ensure floor can support weight.

First-Time Setup

After installation, allow freezer to stabilize before use.

  1. Initial cooling: Plug in and set temperature to -18°C; let run for 4-6 hours.
  2. Temperature setting: Use control panel to set desired freezing temperature.
  3. SuperCool activation: Press SuperCool button when adding large quantities.
  4. Child lock: Enable via control panel if needed.

CAUTION! Do not load items until temperature is stable. Keep door closed during initial cooling.

Specifications

Controls and Settings

Electronic control panel located on front of unit.

Buttons: Temperature adjustment (+/-), SuperCool, Alarm reset, Child lock.

Temperature: Range from -24°C to -16°C; recommended -18°C. SuperCool: Activates rapid cooling for 24 hours then returns to set temperature. Alarm: Sounds if temperature rises; press to acknowledge. Child lock: Press and hold for 3 seconds to enable/disable.

Connecting to Power

Use dedicated grounded outlet; avoid extension cords.

  1. Ensure voltage matches rating (220-240V AC).
  2. Plug directly into wall outlet.
  3. Do not use multi-socket adapters.

Tip: Use voltage stabilizer if power fluctuations are common in your area.

Using Freezer Functions

Optimize freezing with proper function use.

  1. SuperCool: Activate 2-3 hours before adding large quantities of unfrozen food.
  2. Fast freezing: Use for items that need quick freezing like berries or herbs.
  3. Temperature adjustment: Adjust based on load; lower for full loads.
  4. Alarm reset: Press alarm button after addressing temperature issue.

WARNING! Do not block air vents inside freezer. Keep door closed as much as possible.

Storage & Organization

Use shelves and compartments efficiently.

Shelves: Adjust height for different item sizes. Door compartments: Store frequently used items. Labeling: Date packages for first-in-first-out use. Maximum capacity: Do not exceed load line marked inside.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth.

  1. Interior: Wipe shelves and walls with damp cloth; dry thoroughly.
  2. Exterior: Clean with mild soap solution; avoid abrasive cleaners.
  3. Condenser: Vacuum rear grille every 6 months for efficiency.
  4. Door seals: Wipe clean to maintain proper seal.

CAUTION! Never use sharp objects to remove ice (not needed with NoFrost). Do not use steam cleaners.

Regulatory Information

CE certified; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Liebherr-Hausgeräte GmbH. For support, visit www.liebherr.com or contact local service center. Disposal: Follow WEEE regulations; do not dispose with household waste.

Troubleshooting

SymptomPossible CauseCorrective Action
Freezer not coolingPower issue/doorsCheck power connection; ensure door closes properly; wait 24 hours after installation.
Temperature alarm soundsDoor open/temperature riseCheck if door is ajar; reduce load; press alarm button to reset.
Excessive frostDoor seal/NoFrost systemClean door seal; ensure NoFrost is functioning; contact service if persistent.
Unusual noiseLeveling/items touching fanRe-level unit; ensure items not touching rear wall; check for loose parts.
Control panel not respondingChild lock/powerDisable child lock; check power supply; unplug for 5 minutes then restart.

Reset: Unplug for 10 minutes to reset electronic system.

Service: Contact authorized Liebherr service center; www.liebherr.com

Liebherr freezer FNc 5076 Manual © - All Rights Reserved 2025