Liebherr freezer CBNsth 579i Manual

The Liebherr CBNsth 579i is a premium upright freezer featuring NoFrost technology, BioFresh compartments, SmartDevice connectivity, electronic temperature control, alarm systems, super freezing function, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Upright freezer with NoFrost technology, BioFresh compartments, SmartDevice connectivity, electronic control panel, interior lighting, and adjustable shelves.

Installation

Unpack and inspect contents. Position on level floor.

1. Choose location: Place on stable, level surface away from heat sources.
2. Adjust feet: Use adjustable feet to level the appliance.
3. Ventilation: Ensure minimum clearance (5 cm sides, 10 cm back, 30 cm top).
4. Electrical connection: Plug into grounded 120V AC outlet.
5. Door alignment: Check door swings freely and seals properly.

WARNING! Freezer is heavy; use two people for moving. Ensure proper ventilation to prevent overheating.

First-Time Setup

After installation, allow freezer to stabilize before use.

1. Initial cooling: Plug in and set to desired temperature. Allow 24 hours to reach optimal cooling.
2. Temperature setting: Use control panel to set freezer temperature (recommended -18°C / 0°F).
3. Super freezing: Activate super freeze function 24 hours before loading large quantities.
4. SmartDevice setup: Download Liebherr Home app and follow pairing instructions.
5. Alarm test: Verify door and temperature alarms are functioning.

CAUTION! Do not load food until temperature is stable. Keep doors closed during initial cooling.

Specifications

• Model: CBNsth 579i
• Type: Upright freezer with NoFrost
• Total Capacity: 279 liters (9.85 cu ft)
• BioFresh Capacity: 37 liters
• Energy Class: A+++
• Annual Energy Consumption: 186 kWh
• Noise Level: 38 dB
• Refrigerant: R600a
• Climate Class: SN-T (10°C to 43°C)
• Power Supply: 120V AC, 60Hz
• Dimensions (HxWxD): 177 x 60 x 64 cm
• Weight: 78 kg

Controls and Settings

Electronic control panel located on front exterior.

Control Panel: Temperature display, Temperature adjustment buttons, Super freeze button, Alarm reset, SmartDevice indicator.

Temperature Settings: Range from -24°C to -14°C (-11°F to 7°F). Super Freeze: Activates rapid cooling for 24 hours then auto-switches to normal. Alarm Functions: Visual and audible alerts for door open >2 minutes or temperature increase. SmartDevice: Monitor temperature, receive alerts, adjust settings remotely via app. BioFresh Settings: Adjust humidity levels for fruit/vegetable compartments.

Connecting Devices

SmartDevice connectivity via WiFi.

1. Download Liebherr Home app from App Store or Google Play.
2. Enable WiFi on smartphone/tablet.
3. Press and hold SmartDevice button on control panel for 3 seconds until indicator flashes.
4. Follow app instructions to connect freezer to home network.
5. Name your freezer in the app for identification.

Tip: Ensure freezer is within range of your WiFi router. Use 2.4GHz network (5GHz not supported).

Storage and Organization

Optimize storage for energy efficiency and food preservation.

1. BioFresh compartments: Use for fruits, vegetables, dairy (adjust humidity as needed).
2. Freezer baskets: Organize by food type (meats, vegetables, prepared meals).
3. Door storage: Use for smaller items, ice packs, frozen herbs.
4. Labeling: Date all frozen items and use within recommended timeframes.
5. Loading: Avoid overpacking; allow air circulation around items.
6. Freezing fresh food: Use super freeze function for large quantities.
7. Defrosting: No manual defrosting required with NoFrost technology.

WARNING! Do not store explosive substances or glass containers with liquids that may freeze and burst.

Maintenance & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance.

1. Exterior: Clean with mild detergent and soft cloth. Avoid abrasive cleaners.
2. Interior: Remove shelves and drawers. Wash with baking soda solution (1 tbsp per liter water).
3. Seals: Clean door gaskets with water only to maintain elasticity.
4. Condenser: Vacuum rear condenser coils every 6-12 months.
5. Drain: Check drain hole (if present) is clear of debris.

CAUTION! Never use sharp objects to remove ice (not needed with NoFrost). Do not use steam cleaners.

Regulatory Information

CE certified. Complies with EU directives for electrical equipment. Contains refrigerant R600a (flammable). Dispose according to WEEE regulations. Copyright © Liebherr-International AG. For support, visit www.liebherr.com or contact local service center.

Troubleshooting

Reset: Unplug for 5 minutes then reconnect to reset electronics.

Service: Contact authorized Liebherr service center. Do not attempt repairs yourself.