Liebherr freezer BAY 210low Manual

The Liebherr BAY 210low is a freestanding freezer with a net capacity of 210 liters, featuring Liebherr's advanced NoFrost technology, electronic temperature control with digital display, SuperCool function, alarm system, child lock, reversible doors, and energy efficiency class F. Designed for household use, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Storage Guidelines 7. Energy Saving Tips 8. Defrosting & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: NoFrost system, electronic control panel, interior LED light, adjustable feet, reversible doors, freezer baskets, ice cube tray.

FeatureDescription
NoFrost technologyPrevents ice buildup automatically
Electronic temperature controlDigital display with precise temperature setting
SuperCool functionRapidly cools new items
Acoustic/visual alarmAlerts if door left open or temperature rises
Child lockPrevents unintended setting changes
Reversible doorsDoor can be hung left or right
Adjustable feetFor leveling on uneven floors
Interior LED lightEnergy-efficient illumination
Freezer baskets2 transparent baskets for organized storage
Energy class FEnergy-efficient operation

Installation

Unpack and remove all packaging materials. Allow to stand upright for 4 hours before connecting to power.

  1. Choose location: Place on stable, level surface away from heat sources and direct sunlight.
  2. Adjust feet: Use wrench to adjust feet for proper leveling.
  3. Ventilation: Ensure at least 5cm clearance at back and sides for air circulation.
  4. Reverse doors (optional): Follow instructions in door reversal kit if needed.
  5. Plug into grounded power outlet.

WARNING! Do not tilt beyond 45° during transport. Use two people for handling.

First-Time Setup

After installation, power on the freezer.

  1. Initial cooling: Allow 24 hours to reach optimal temperature before loading food.
  2. Set temperature: Press TEMP button to set desired freezing level (recommended -18°C).
  3. Activate SuperCool: Press SUPERCOOL button for rapid cooling when adding large quantities.
  4. Set child lock: Press and hold LOCK button for 3 seconds to activate/deactivate.
  5. Load food: Distribute items evenly across baskets.

CAUTION! Do not overload freezer. Ensure door closes properly after loading.

Specifications

Controls and Settings

Control panel located on front upper section.

Buttons: POWER, TEMP (+/-), SUPERCOOL, ALARM RESET, LOCK.

Temperature setting: Range from -24°C to -16°C. Default -18°C. SuperCool: Activates for 24 hours then returns to set temperature. Alarm: Sounds if temperature rises above -12°C or door left open >2 minutes. Child lock: Prevents accidental setting changes when activated. Display: Shows set temperature, alarm icons, SuperCool status.

Storage Guidelines

For optimal freezing and energy efficiency.

  1. Pre-cool hot foods before freezing.
  2. Use airtight containers or freezer bags to prevent freezer burn.
  3. Label items with date and contents.
  4. Distribute items evenly across baskets.
  5. Do not block air vents inside compartment.
  6. Maximum freezing capacity: 10 kg per 24 hours.

Tip: Organize by category for easy access and inventory management.

Energy Saving Tips

  1. Maintain temperature at -18°C (optimal balance).
  2. Ensure door seals are clean and intact.
  3. Minimize door opening frequency and duration.
  4. Position away from heat sources (oven, radiator).
  5. Allow hot foods to cool before freezing.
  6. Defrost regularly if NoFrost not fully preventing buildup.
  7. Ensure adequate ventilation around appliance.

Note: Energy consumption increases with frequent door openings.

Defrosting & Cleaning

NoFrost reduces but may not eliminate defrosting needs.

  1. Unplug freezer and remove all food.
  2. Place towels around base to catch water.
  3. Leave door open to accelerate melting.
  4. Wipe interior with solution of warm water and mild detergent.
  5. Dry thoroughly with soft cloth.
  6. Clean door seals with water only.
  7. Clean exterior with damp cloth; avoid abrasive cleaners.

CAUTION! Never use sharp objects to remove ice. Do not use steam cleaners.

Safety Features

Door alarm: Sounds after 2 minutes if door not fully closed. Temperature alarm: Activates if temperature rises above -12°C. Child lock: Prevents accidental setting changes. Automatic defrost: NoFrost system minimizes ice buildup. Over-temperature protection: Compressor protection circuit.

Regulatory Information

CE compliant. WEEE directive: Do not dispose with household waste. Use authorized collection points. RoHS compliant. For EU: This product contains fluorinated greenhouse gases covered by the Kyoto Protocol. Refrigerant R600a (isobutane) is flammable. Manufacturer: Liebherr-Hausgeräte GmbH, Memminger Straße 77-79, D-88416 Ochsenhausen. For support, visit www.liebherr.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Freezer not coolingPower supply/plugCheck power outlet; ensure plug inserted properly; check circuit breaker.
Temperature too highDoor seal/overloadingCheck door seal; ensure door closes fully; reduce loading if excessive.
Alarm soundsDoor open/temp riseClose door properly; check temperature setting; allow cooling time after loading.
Excessive frostDoor seal/frequencyCheck door seal integrity; reduce door opening frequency.
Unusual noiseLeveling/placementEnsure freezer is level; check for objects touching back panel.
Display not workingPower/child lockCheck power connection; deactivate child lock to access controls.

Reset: Unplug for 5 minutes then reconnect to reset electronics.

Service: Contact authorized Liebherr service center. Do not attempt repairs yourself.

Liebherr freezer BAY 210low Manual © - All Rights Reserved 2025